The electrochemical treatment of metals to obtain a smooth, corrosion-resistant finish and improve metal durability and performance is called electropolishing. This process is relatively new and is now becoming the replacement for mechanical techniques in almost every industry. Unlike conventional metal finishing, electropolishing does not smear, bend, stress or fracture the metal. Electro-Kleen uses electropolishing for a wide range of metal parts, including gears and roller bearings, surgical instruments, pump and valve shafts, knives, fabricated tanks, and welded tubular products. When mechanical finishing is too expensive or cannot accomplish what is required, call Electro-Kleen!
Electro-Kleen uses an electro polish technique to achieve a top quality finish on metal or stainless steel products including nails, bolts, hinges, surgical instruments, tanks, and more. Our experienced staff of technicians have the capability to electro polish items, such as the internal surfaces of very small metal tubing, that were previously deemed ‘impossible’ to electro polish. The life span of the metal is also increased since our process maximizes corrosion protection and reduces tarnishing in most metals and alloys. Our finishing solutions are achieved at a fraction of the price of mechanical polishing, and produce long-term savings by increasing production cycles and decreasing cleaning time.
Electro-Kleen uses an electropolish technique to achieve a top quality finish on metal or stainless steel products. Using a reverse plating technique, electropolish involves immersing a metal or alloy in a chemically balanced solution through which a low voltage is passed. This controlled process removes microscopic amounts of metal from the object's surface to reveal the basic metal surface - a surface which is bright, clean and microscopically smooth. By undergoing our electropolish process, metals not only perform better, they look great - at a cost which is significantly lower than mechanical techniques.
Our electro chemical polishing process is now becoming the replacement for mechanical techniques used for metal finishing of products in almost every industry. By undergoing our electro chemical polishing process, metals not only perform better, they look great - at a cost which is significantly lower than mechanical techniques. Our trained laboratory technicians have hands-on experience with many different types of metal and different types of electro chemical polishing applications. This experience enables us to understand our customers' needs, and to provide an efficient and cost-effective way of improving the performance of virtually any problem surface. For more information about our finishing treatments, call us at (905) 273-9808.
A relatively new and constantly evolving process that is now becoming the replacement for mechanical finishing in almost every industry is the process of chemical polishing. Using a reverse plating technique, chemical polishing involves immersing a metal or alloy in an electrolytic solution. All excess metal is removed as metallic salt, leaving a surface that is microscopically smooth and free of any blemishes. By undergoing Electro-Kleen’s electrolytic chemical polishing process, metals not only perform better, they look great - at a cost which is significantly lower than mechanical techniques. We can handle a full range of parts including gears and roller bearings, surgical instruments, pump and valve shafts, knives, fabricated tanks, and welded tubular products.
The aerospace, electronics, medical and similar high-tech industries have used chemical passivation for years, but are now using electropolishing of metals as a replacement process. The passivation methods of using citric or nitric acid solutions to remove surface contamination from stainless steel produce clean, corrosion resistant surfaces, but do not achieve the bright and lustrous appearance obtained with Electro-Kleen’s electropolishing methods. The corrosion resistance of electropolished stainless steel far exceeds that of standard passivation processes. For industries in which a fine metal finish is necessary, electropolishing brings quality to unprecedented levels at a comparatively low price. When mechanical polishing is too expensive or cannot accomplish what is required, call Electro-Kleen!
Electro-Kleen provides cutting-edge metal finishing services to almost every industry. Our electropolishing process of metal finishing is an extremely effective process because unlike conventional metal finishing, electropolishing does not smear, bend, stress or fracture the surface. The life span of the alloy is also increased since electropolishing maximizes environmental corrosion protection and reduces tarnishing in most metals and alloys. Electropolishing is achieved at a fraction of the price of mechanical polishing, and produces long-term savings by increasing production cycles and decreasing cleaning time. Whether you require advice on polishing problems, or lightening-fast turn around on your parts, Electro-Kleen provides an unsurpassed level of service.
Electro-Kleen is the largest independent electropolisher in Canada. Unlike conventional metal polishing, our process does not smear, bend, stress or fracture the alloy. Other methods of metal polishing do not achieve the bright and lustrous appearance obtained with Electro-Kleen’s electropolishing process. When using our service, products not only perform better, they look great - at a cost which is significantly lower than other metal polishing processes. We have a significant European customer base as well as a strong presence in the US. Electro-Kleen can electropolish a wide range of steel parts, including gears and roller bearings, surgical instruments, pump and valve shafts, knives, fabricated tanks, and welded tubular products.
Electro-Kleen is a global leader in developing cutting-edge electropolishing solutions. All stainless steel finishing treatments - including polishing, sandblasting, and grinding - reduce the buildup of bacterial biofilms, but electropolishing always outperforms the rest in contamination prevention. Unlike conventional stainless steel finishing, electropolishing does not smear, bend, stress or fracture the metal. Electropolishing can be performed on a wide range of metals and metal parts, including knives, nails, surgical instruments, gear parts, and much more. Whether you require advice on stainless steel finishing problems, or lightening-fast turn around on your parts, Electro-Kleen provides an unsurpassed level of service. For more information, call us at (905) 273-9808.
